Laser cutting 10mm acrylic?

[John S]

Hugh.
Recently bought a 40 watt unit and it will cut 10mm perspex at 1mm/sec at 100% power.
Not a bad but but a little bit of striation marks on the bottom part of the cut.

Can post a pic if you want.

[camhguh]

Hugh.
Recently bought a 40 watt unit and it will cut 10mm perspex at 1mm/sec at 100% power.
Not a bad but but a little bit of striation marks on the bottom part of the cut.

Can post a pic if you want.

Thanks John ! now that sounds interesting!

yes please, a pic would be nice if you have one to hand!

How expensive was the laser unit?