-
05-09-2012 #1
Hi guys, suppose this is where my geekyness might come in, I’ve just got my orders of raspberry PI’s it’s a credit card sized HD PC costing about £30 and runs of USB ( so u can use a USB charger). Now I hadn’t thought about it for say Mach3 etc but someone pm’d me on anther forum about a serial port emulator for it , so I had a look and there’s a gert board that would work fine for about £10 just some code and it should work.. I say “should” need to look at it a bit more, and at the moment I’m up to my eyeballs. But if it works it would mean a puter for the CNC for less than £50 and with a massive power saving and heat output. Also for another £20 SD card you can turn it instantly into a HD media centre and or even an ICE box. There will be a really nice touch screen soon as I should think loads of people want one and companies are fighting each other to get one to market, so I expect it to be cheap.
Anyway I thought it would be worth looking at.
Heres a thread on the subject
RaspCNC
PortwiresLast edited by Fivetide; 05-09-2012 at 10:51 PM. Reason: link missing
Fiction is far more plausible when wrapped around a thread of truth
Nothing great was ever achieved without enthusiasm.
Ralph Waldo Emerson
-
05-09-2012 #2
Here ya go, Irving is already on the case, although in his own custom coding way - http://www.mycncuk.com/forums/comput...pberry-pi.html
-
05-09-2012 #3
thanks m_c lol ok admin kill the thread I walk in the shadow of giants ..:)
Fiction is far more plausible when wrapped around a thread of truth
Nothing great was ever achieved without enthusiasm.
Ralph Waldo Emerson
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
cnc print a raspberry
By george uk in forum General DiscussionReplies: 7Last Post: 13-06-2014, 01:13 PM -
Raspberry Pi
By irving2008 in forum General ElectronicsReplies: 50Last Post: 06-10-2012, 09:26 AM
Bookmarks