Thread: Spindle torque required
-
06-09-2012 #1
Here's one to get the brain cells working.
If you have an aluminium part, approximately 15mm diameter mounted on a spindle (we'll call it spindle one, or S1), and you want to machine said part with a 6mm cutter mounted on a seperately powered spindle (spindle two /S2), how many Nm will S1 need to ensure that the cutter in S2 won't spin it in ways you don't want it.
And assume that S2 would have enough power to snap the cutter long before it stalled.
Answers on a postcard please.
-
06-09-2012 #2
Crudely, as long as S1 has more torque than 15/6 of S2 it'll stay put... ish.. it all depends on DOC and feed rate as well as S2 spindle speed, power input and cutting efficiency of tool...
For some theory look here: aluMATTER | Aluminium | Milling | Milling: Overview then take a wild guess :)
-
06-09-2012 #3
Interesting link that.
I've just had a quick google, and one of the first hits was Cutting Force During Milling - CNCzone.com-The Largest Machinist Community on the net!
Which for a 1/4" cutter gives a maximum measured force of 700N.
Now taking Torque = Force x distance = 700N x 0.015m = 10.5Nm
Which isn't quite high enough to totally kill my simple idea, but would involve a stupidly powerful motor, so back to the complex idea.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Use spindle torque to control feedrate?
By Jonathan in forum Tool & Tooling TechnologyReplies: 4Last Post: 02-05-2014, 10:37 AM -
Calculating torque settings for bolts.
By swarf-boy in forum Machine DiscussionReplies: 2Last Post: 22-12-2010, 12:18 AM -
Torque Values?
By pjl83 in forum Gantry/Router Machines & BuildingReplies: 6Last Post: 04-06-2010, 10:05 PM -
High Torque Motor Z Axis
By Lee Roberts in forum Stepper & Servo MotorsReplies: 5Last Post: 17-05-2009, 10:08 PM -
What stepper motor size (torque)
By ZeroCount in forum Stepper & Servo MotorsReplies: 5Last Post: 09-02-2009, 11:54 PM
Bookmarks