Very well said Robin and couldn't agree more.
Right or wrong I often try to intervene Via PM when ever I see someone new(Hate the word "noobie") to CNC looking like they are taking the wrong path. Unfortunately can't help all of them and some just don't want help.!

Can't tell you how many emails or PM's I get from people who don't EVER post but still are looking and wanting to building a machine. Often they will present me with a wish list of components or packages they have settled upon from weeks or month's of reading threads.
They are mostly asking me to check it over for them and verify it's ok.? Would say 90% of them get it wrong. . . . Usual suspects Too low PSU, Too small drives, Too large drives, Too large motors, Wrong pitch, Wrong diameter, Unsupported rails, massive OTT profiled rail.! . . Then comes the frame starting with MDF, Too small extrusion, Too thin plate, Too little bracing, Too long Z axis, Too high gantry sides and almost exclusively Too much cutting expectations with Too little budget.!!

So my advice to all New to CNC is just start a thread with your intentions and expectations and given a little time and patience then all the answers to build a successful machine will come.!! . . . Keep Stum and Go it alone and you'll more than likely get something wrong just costing more time and money in the long run.?

If you plan to buy ready built then again post for opinions.! . .BUT . . like the Strike CNC thread shows don't t think for one minute just because WE say it looks OK it will be.? There are a lot of Conmen and fly by night rip-off merchants and unfortunately with CNC it's easy to blind the uninitiated with science and jargon and with a bit WOW factor cutting thrown in easy to get hooked.
If you do take this route and spending several ŁK then I suggest the best course of action is to speak with other users of the actual machine and better still if possible take a experienced CNC person with you to view. Buying ready built is a mine field and unfortunately with CNC price doesn't always reflect the quality.!!

DIY and you get exactly whats on the tin.? . . . . So long has you buy the right tins. . Lol

Good luck.