Cutting area is currently ~770x280x110mm, so quite small compared to many machines, although once in the new workshop I'll be making a few changes to increase the area if needed:

1. I am going to make the side support extrusions removable so if I need larger pieces I can index them and cut in sections (for wood/MDF though) just need to think about how to mount them without the need to remove the x-axis rails each time I want to switch function....

2. If I bolt the machine to the steel framed workbench and its rigid enough I should be able to "drop" the bed down to increase my Z axis (a 4th axis may require this dependant on the diameter of work piece and size of 4th axis I need or get).