Hi Guys,

Having slept on the problem of my stuck machine can someone with wiring knowledge check a theory I have:

I've been wiring up according to this diagram on the Zapp website: http://www.zappautomation.co.uk/down...%20%281%29.pdf

Looking at it and taking the x axis as an example, the wiring diagram shows all the +ve connectors for Pulse, Direction and Enable wired together and going back to XN (which I am assuming is X -ve?). Shouldn't this be the other way round i.e. the Pul-, Dir- and Ena- should be wired to XN?

If so I can re-wire and try, but some wiser head than mine with a view would be appreciated.

Thanks in advance.


Chris