Quote Originally Posted by Jonathan View Post
Yes, clearly if you set the acceleration higher you want to test the system thoroughly to make sure the motors wont stall. After doing what Jazz suggests, I suggest running some code from here:

http://www.mycncuk.com/forums/gcode/...or-tuning.html

Then you can change from 'should be fine' to almost certainly fine.
That's handy Jon not seen that before and with G61 exact stop mode at G0 speeds with high acceleration it will double to test of how anchored the machine is.!! . . . . . Again careful has with high settings the Bloody thing will try to walk off. . Lol