It's begun....

[Washout]

Evening all,
.
A quick pic showing some more progress since my last post:
.
This one shows:
a new and longer air line,
a remount of the "mixer" block so I don't lose any Y axis travel
the coolant/cutting fluid line attached and also a reservoir for the fluid on the top of the gantry at the back
.
The only thing I am missing now is a 1/4" male to 1/8" male adapter for the air line (its current position is "fake" as a "dry run" and the connector there is a mock one from a PC cooling system. Hopefully the adapter arrives soon or I'll have to work out how to setup my lathe for threading (if it can cut BSP - it does metric and imperial).
.
Later
.
.
Chris