Thread: operation cnc
Hybrid View
-
04-10-2012 #1
Last Activity: 17-03-2017
Another thought/idea: if you're going for that layout is to consider putting the x-axis motors/rotating ballnuts on the gantry rather than rotate the ballscrews. This way you could easily upgrade from 1m to 3m by changing out the ballscrews & x-rails and retain the same motors/etc. and you dont need to invest in expensive bearings for the ballscrews. The downside is marginally more weight on the gantry and constructing rotating ballnut mounts is more tricky.
-
The Following User Says Thank You to irving2008 For This Useful Post:
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 6 users browsing this thread. (0 members and 6 guests)
Similar Threads
-
Milling machine CNC conversion - keep hand wheels for manual operation?
By birchy in forum Milling Machines, Builds & ConversionsReplies: 5Last Post: 23-10-2016, 08:29 PM -
clunks / missing steps - DM856 and single pulse operation
By dsc in forum Motor Drivers & ControllersReplies: 37Last Post: 09-12-2013, 02:22 PM -
screening / glitchy operation - sanity check
By dsc in forum General ElectronicsReplies: 21Last Post: 01-12-2013, 11:35 PM -
CNC3040 erratic stepper motor operation (fixed)
By DanielF in forum Motor Drivers & ControllersReplies: 0Last Post: 30-12-2012, 07:52 AM -
BUILD LOG: Operation Clueless, CNCRP 4848 Build Log Eventually.
By BedlamRik in forum DIY Router Build LogsReplies: 12Last Post: 28-12-2012, 12:39 AM
Bookmarks