Evening Gents...

Right then... got a video for you at long last...

Past few days have been spent messing around with Mach3... and this evening ive been googling G-code... and even wrote my first bit

this is the 'house'
>>dont properly understand this bit copied it off internet
g0 g21 g90 g50 g80 f100
g0 z0 g0 x0 y0 set
m98 p1 l10
g0 x0
m30
%
o1

>> this is the bit i wrote!
z-30 >> drop the z down to where the pencil touches
g1 x0 y0 f3500
g1 x-200
g1 y-200
g1 x0
g1 y0
g1 y-200 x-200 f3200
g1 y0
g1 y-200 x0
g1 y0
g1 x100 y-100
g1 x0 y-200
g1 y0

and the circle... Really dont undestand this... found a wizard page on the net that made it...

G21 (mm)
G0
F3200.00
X0 Y0 Z0
Z-30
G1 X-99.5000Y0.0000
G2 X-99.5000Y0.0000 i99.5000j0
G0Z0.1000 (Retract)




thanks to Jazz and Jonathon for their help and patience with my repeated stupid questions

hope this inspires others.... (WILFY!!!!) to get started!!