. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 07-10-2012 #4
    irving2008's Avatar
    Lives in NW London, gateway to A1 & M1, United Kingdom.
    irving2008
    Last Activity: 17-03-2017 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,849. Received thanks 179 times, giving thanks to others 5 times. Referred 6 members to the community.
    Having done a little reading, it would seem GD and VS are non-standard extensions for a specific but otherwise "unspecified" machine. The use of Vectric Cut-2D and the HPGL PU/PD command would, I guess, be intended for a vinyl cutter where its knife out/knife in, the actual depth beng set on the machine for the material used. It is '2D' after all :)
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to irving2008 For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Wiring up the Alarm output on Leadshine AM882
    By Shinobiwan in forum Motor Drivers & Controllers
    Replies: 42
    Last Post: 01-08-2017, 02:07 AM
  2. Stepper Motor Driver - cheap similar to ArcEuro 4.2A Bi-Polar Stepper Motor Driver
    By craynerd in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 16-03-2014, 07:29 PM
  3. Output direct to machine
    By picyman in forum Vectric
    Replies: 4
    Last Post: 16-02-2014, 11:04 PM
  4. solidworks, solidcam, mach3 how to output gcode in solid cam
    By jcb121 in forum Solidworks
    Replies: 1
    Last Post: 20-10-2012, 02:50 PM
  5. 2 Machines 1 Switch for the output - Connections
    By Ian Hart in forum General Electronics
    Replies: 7
    Last Post: 02-04-2010, 02:33 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules