Steppers (3), Drives (3), Breakout board and 500w 48v PSU

**deannos** · 10-10-2012

for sale due to change in plans and time, were only used for a couple of hours

3 X Stepper motors - 3Nm, double shaft (low inductance) (M60STH88-3008DF)
3 X Microstepping Drives - 50VDC, 4.2A (MSD542)
Parallel port breakout board
48v / 500W PSU

Looking for £180 ono including postage

**JoeHarris** · 10-10-2012

Would you be willing to split them up?

**deannos** · 10-10-2012

Originally Posted by JoeHarris

Would you be willing to split them up?

I would really like to sell them as a complete set.

**audioandy** · 10-10-2012

You have PM

**Jonathan** · 11-10-2012

Looks like I'm too late here. If you are willing to split I'd like then I reserve the 3 stepper motors

**audioandy** · 11-10-2012

Still waiting for a reply to my PM Jon I've told Dennos I'm Interested in the lot

**irving2008** · 11-10-2012

Too late guys, I was there before you

(by about 2 hours ) but still waiting on a reply as well...

**WandrinAndy** · 11-10-2012

Originally Posted by irving2008

Too late guys, I was there before you

(by about 2 hours ) but still waiting on a reply as well...

You sure have a nose for a bargain Irving.... I'm almost starting to think that you somehow get advance notification whenever there's one going ;-)

**Lee Roberts** · 11-10-2012

Originally Posted by WandrinAndy

You sure have a nose for a bargain Irving.... I'm almost starting to think that you somehow get advance notification whenever there's one going ;-)

Best thing to do is setup an RSS Feed to the forum your most intrested in, depends what program you use for RSS as to how/what options you get but its really easy to do.

.Me