Threaded View
-
15-10-2012 #2
Last Activity: 4 Hours Ago
Parts marked in red would become one part in the shape of a T, the L shape sides could then have a recess/pockets on the inside of the machine for the T shape to fit into and also allow it to be fixed from the outside of the machine. This should help any nuisances at the bottom of the spindle to be absorbed by more of the machine (L shape sides).
Front part marked in yellow, extened this to the full width of the head/machine and this will move your lines to the side view of the machine (aesthetics).
.Me.Me
-
The Following User Says Thank You to Lee Roberts For This Useful Post:
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
RFQ: Joint assembly needed making from 7075 T6 billet.
By dudz in forum Projects, Jobs & RequestsReplies: 2Last Post: 06-11-2013, 11:26 PM -
ballnut housing and floating end ballscrew assembly
By dsc in forum Lead Screws, Nuts & SupportsReplies: 12Last Post: 12-07-2013, 08:22 AM -
RFQ: simple plates for a z axis assembly - 15mm Ecocast Alu
By dsc in forum Projects, Jobs & RequestsReplies: 7Last Post: 04-01-2013, 04:31 PM -
Z axis assembly - unsupported rail for very limited movement
By dsc in forum Gantry/Router Machines & BuildingReplies: 2Last Post: 10-10-2012, 12:44 PM -
RFQ: RFQ: Aluminium gear selector assembly
By Bokoshoko in forum Projects, Jobs & RequestsReplies: 2Last Post: 30-08-2011, 10:32 AM
Bookmarks