Thread: Corian and similar products
-
18-10-2012 #1
I have managed to get hold of some Corian and I really like it, the problem is for small amounts it’s in very short supply and if I’m honest expensive. Have any of you guys used similar products that are easier to source and more locally available?
Fiction is far more plausible when wrapped around a thread of truth
Nothing great was ever achieved without enthusiasm.
Ralph Waldo Emerson
-
18-10-2012 #2
So far I have this list of materials for solid surface. I have emailed as many kitchen fitters that I could google locally so I'll wait for a response. Any other materials ?
Corian® sheets
Select Grade--off-standard colors
HI-MACS
Avonite
Dovae
Hanex
House Premium--by SolidSurface.com
Meganite
Simplicity
Staron
Wilsonart
Fiction is far more plausible when wrapped around a thread of truth
Nothing great was ever achieved without enthusiasm.
Ralph Waldo Emerson
-
18-10-2012 #3
How big a bit are you looking for?
I went into my local kitchen design/install place and came away with some 'samples' of both corian and granite which were the offcuts from where the sink cutout was made... (obviously not from the 'formed' corian worktops but the ones cut on site)
-
The Following User Says Thank You to irving2008 For This Useful Post:
-
18-10-2012 #4
Fiction is far more plausible when wrapped around a thread of truth
Nothing great was ever achieved without enthusiasm.
Ralph Waldo Emerson
-
18-10-2012 #5
Ah, sorry... cross purposes... I wasnt offering any for sale, just recounting how i got hold of a few (4 or 5) bits... all have been used for stuff... not sure I have any left other than the nice bit of polished granite I use as a makeshift surface plate. But yes they were full thickness as far as I recall.
-
18-10-2012 #6
Fiction is far more plausible when wrapped around a thread of truth
Nothing great was ever achieved without enthusiasm.
Ralph Waldo Emerson
-
20-10-2012 #7
It's like Hens Teeth, I have a pal that does kitchen fitting and general jobbing, every occasion that i bump into him i ask about Corian offcuts but it's always the same story, lots of people would like it but they soon have a re-think when there told the price, it could be that we are just tight in our neck of the woods.
Hope you have some luck
Mekanik
-
20-10-2012 #8
PS have seen small pieces on ebay but still silly money for the size of it(blanks for turning pens)
-
20-10-2012 #9
I am going to keep a close eye on this topic, as I am also looking for this.
"If first you don't succeed, redefine success"
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Stepper Motor Driver - cheap similar to ArcEuro 4.2A Bi-Polar Stepper Motor Driver
By craynerd in forum Motor Drivers & ControllersReplies: 1Last Post: 16-03-2014, 07:29 PM -
looking for Corian
By luke11cnc in forum General DiscussionReplies: 3Last Post: 26-07-2012, 08:32 AM -
WANTED: denford nova/star mill - emco f1/ pc50 - boxford vmc or similar wanted
By jonnydeen in forum Items WantedReplies: 2Last Post: 04-06-2012, 12:31 PM -
First Corian Lithopane
By audioandy in forum General DiscussionReplies: 28Last Post: 06-07-2010, 07:04 PM
Bookmarks