Hybrid View
-
27-04-2014 #1
Last Activity: 29-06-2025
If it would fit inside the big Siemens CNC you could skim the plates like you did with the bed.
Or if you had a large flat surface you could turn the frame upside down, the plates would lie on the flat surface than put some epoxy putty on them before setting the frame on top, wait until set before inverting and bolting.Last edited by EddyCurrent; 27-04-2014 at 04:44 PM.
Spelling mistakes are not intentional, I only seem to see them some time after I've posted
-
26-01-2016 #2
Last Activity: 24-07-2016
Long time no update. Here are few new pictures of my build.
Last edited by DigiSoft; 26-01-2016 at 06:56 PM.
-
27-01-2016 #3
Last Activity: 24-07-2016
Here is comparison, Design vs Real
-
27-01-2016 #4
Last Activity: 4 Weeks Ago
Nice work digisoft, should work well
Any photos of the 'front' of the machine showing the spindle / Z axis?
-
27-01-2016 #5
Last Activity: 24-07-2016
Originally Posted by routercnc
Yep, I'll make new photos today with better camera.
-
27-01-2016 #6
Last Activity: 24-07-2016
Here are some more pictures from the front.
-
The Following 2 Users Say Thank You to DigiSoft For This Useful Post:
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: New Build - For Your Amusement - MK-2 build
By Karl in forum DIY Router Build LogsReplies: 12Last Post: 08-02-2017, 08:03 PM
Bookmarks