Tiddy CNC.

[JAZZCNC]

Tony Jazzcnc hit the nail on the head I could not think straight last night.

Alcholic Pisshead syndrome. . .

Thanks. I guess I need to figure out a way to mount the switches on both sides with enough adjustment they both connect at the same time.

Tony if you use the bullet type proximity switches they have a threaded body which you can use for adjustment. Also if using proximity switches you can use the sensing distance as kind of fine tuning which is handy for setting slaved motors.

[TonyD]

Finally, auto home on all axis - thanks for the help. For the help of others, although as Jazz says the dual input was required and I didnt have that to start with, once I wired that up I still didnt have the dual X axis home working. I was about to write a detailed post here with all my Mach config settings when I noticed a discrepancy between the various B or A axis settings, once they were all pointing to the same B axis it worked. Happy days :)

[EddyCurrent]

It's great when a problem is solved, say "hi" to Peppa Pig for me

[TonyD]

Oink! Oink!