Tiddy CNC.

[Boyan Silyavski]

Wise decision if you don't have the means. I welded mine with my new welder this weekend. I fiddled a lot, as my first real weld and had to wait for a friend to take it of the welding supports and bring it inside the garage. You will be surprised of the robustness of the design. Dont forget what i suggested you in the email, spend 5-10 pounds more and weld vertically a 5mm or similar whatever flat bar plate at least along the middle profile of the table bed for vertical reinforcement. If it was me, i would weld on the 3 of them. Just for the sake of extreme robustness. Of course, depends whatever you intend to use as table bed. Also these bars can be bolted later if needed. However with them you will have astonishingly minimal overall deflection/less than 0.05mm i believe/

I don't know about your gantry and Z but with this you can do aluminum on the breeze



Whatever, looks very nice!