. .

Thread: Tiddy CNC.

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 03-09-2014 #32
    Boyan Silyavski's Avatar
    Lives in Denia, Spain.
    Boyan Silyavski
    Last Activity: 15-04-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,049. Received thanks 333 times, giving thanks to others 55 times. Made a monetary donation to the upkeep of the community.
    The Z as Clive said should be 0 at the Top and go down with negative sign.

    Do you recalculate the toolpath? When set working Z0 i mean.

    Ok Zero at the middle of the air. Then in the mdi window write Z-1 and hit enter. It should go down from there 1mm/ becarefull if in inch cause will go 1 inch down /
    Last edited by Boyan Silyavski; 03-09-2014 at 11:25 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules