. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    yep, it looks identical to that one... mine stated 200W for solar, 38v for 12v charging and 46v for 24v charging... my thinking was seeing a real 250 watts from a 250w panel would be pretty rare in this country and on the occasion that it did it would just be wasted... wouldn't make it to the battery through this charger ?

    I might have bought a lemon with this... it didn't come with any instructions at all and the menu isn't very logical
    you win some and you bin some :)

  2. #2
    Quote Originally Posted by blackburn mark View Post
    46v for 24v charging
    A nominally 24V (72 cell) panel can output close to 46Voc in bright sunlight, so the controller would have to drop the voltage from around that to about(!) 10.5-15V. It depends on how they've designed the converter...

    Quote Originally Posted by blackburn mark View Post
    ... my thinking was seeing a real 250 watts from a 250w panel would be pretty rare in this country and on the occasion that it did it would just be wasted... wouldn't make it to the battery through this charger ?
    The controller will either overheat and cut-out, or if it has a few more brain cells it will regulate the power input to only what it is rated for, so 200W. Solar panels are rated at an irradiance of 1000W/m^2, which is typical in England in the summer.

    Quote Originally Posted by blackburn mark View Post
    you win some and you bin some :)
    Well let me know if you bin it ;)
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.

  3. #3
    Well let me know if you bin it ;)
    ha!... it'll probably smell of burned Bakelite by then :)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Advice please! JAF Motion Controller issues!
    By Mark Chard in forum Machine Control Software
    Replies: 0
    Last Post: 31-01-2014, 05:03 PM
  2. TinyG CNC Controller in the UK?
    By Nimbus in forum Marketplace Discussion
    Replies: 0
    Last Post: 14-06-2013, 06:03 PM
  3. Which controller and motors? Newbie advice please
    By Nealieboyee in forum Motor Drivers & Controllers
    Replies: 14
    Last Post: 16-10-2012, 02:56 PM
  4. UHU Servo Controller
    By gbar in forum Stepper & Servo Motors
    Replies: 4
    Last Post: 11-05-2012, 12:12 PM
  5. Controller Box
    By M250cnc in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 21-11-2010, 01:34 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •