-
09-11-2012 #1
Hi all,
When I was at the modeling show in harrogate last year Arceurotrade had an interesting setting:
On one of there CNC mill they had a 4th axis and the mill was cutting a camshaft without needing re-centering the work piece.
Any idea where to find such G-code ? :-)
Laurent
-
09-11-2012 #2
Speak to John Stevenson.
The thread about the theory behind the code along with a couple pics of the cam can be found over on the HSM board at Formulae neededLast edited by Lee Roberts; 10-11-2012 at 11:29 PM. Reason: Putting thread back on track.
-
09-11-2012 #3
Laurent you can contact John on his member profile page located here: John S via Email and PM.
.MeLast edited by Lee Roberts; 10-11-2012 at 11:21 PM. Reason: Formatting
.Me
-
09-11-2012 #4
Thanks m_c, Lee !
Looks complicated, but I was looking for a challenge... So here is one ! ;-)
-
10-11-2012 #5
Last edited by Lee Roberts; 10-11-2012 at 11:29 PM. Reason: Putting thread back on track.
-
10-11-2012 #6
Last edited by Lee Roberts; 10-11-2012 at 11:24 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Cambium Code Web Tools – Parametric G-code Generation
By CambiumMachines in forum Manufacturer NewsReplies: 0Last Post: 09-01-2013, 04:56 AM -
axis not moving when running code
By geny in forum Computer SoftwareReplies: 0Last Post: 21-10-2012, 08:02 PM -
Precision metal processing (3 axis, 5 axis, 7 axis) OEM
By 7AxisCNC in forum Manufacturer NewsReplies: 0Last Post: 17-05-2011, 02:04 PM -
G Code help
By moose007 in forum Programmers CornerReplies: 4Last Post: 22-05-2009, 11:39 AM
Bookmarks