NEMA Standards

[Ricardoco]

Can anyone tell me what the nema 23 nema 34 and so on is meant to signify, i nkow what they are refering to but for instance are they like shoe sizes or are they like spanner sizes..

Rick

[njhussey]

I believe it's the face width of the face.....i.e. 2.3" x 2.3" for a NEMA 23....1.7" x 1.7" fro a NEMA 17 etc. etc.

[Jonathan]

As nj said...
Also this explains why sometimes the larger, e.g. 3Nm and 4Nm, 'Nema 23' stepper motors are called Nema 24. It's because their body is 60mm wide which is closer to 2.4" than 2.3", which is why it's always best to check the drawing if you have one.

[Ricardoco]

As nj said...
Also this explains why sometimes the larger, e.g. 3Nm and 4Nm, 'Nema 23' stepper motors are called Nema 24. It's because their body is 60mm wide which is closer to 2.4" than 2.3", which is why it's always best to check the drawing if you have one.

Ahh Ok that explains a lot thank you for clarifying that..

Rick

[WandrinAndy]

Also this explains why sometimes the larger, e.g. 3Nm and 4Nm, 'Nema 23' stepper motors are called Nema 24. It's because their body is 60mm wide which is closer to 2.4" than 2.3", which is why it's always best to check the drawing if you have one.

Ahh Ok that explains a lot thank you for clarifying that.

Zigactly.... thanks for that clarity!

[Lee Roberts]

Yea its the frame size, maybe a chart would be handy ?

[Ricardoco]

Yea its the frame size, maybe a chart would be handy ?

Well to be fair i thought i was the only stupid one when i read the replies, so if im not the only stupid one then a chart would be great.

Rick