Software question

[dudz]

Ok, I tried "E machine shop" as CAD, and then as CAM Vectric CUT2D. That was a lot easier . Although I couldn't export the Gcode to Mach3 as I only have the demo version of Cut2d. But I managed to make a simple rectangle with accurate pockets and drill holes in metric. Cambam seems a reel headache to me. (probably my age)

[HankMcSpank]

Ok, I tried "E machine shop" as CAD, and then as CAM Vectric CUT2D. That was a lot easier . Although I couldn't export the Gcode to Mach3 as I only have the demo version of Cut2d. But I managed to make a simple rectangle with accurate pockets and drill holes in metric. Cambam seems a reel headache to me. (probably my age)

Well I'm no spring chicken! But having gone through a similar analysis phase about 18 months ago, i found Vectric to be very slick & pleasing on the eye....but then when I wised up I realised that all the eye candy 'window/GUI centric' approach was just a pain in the arse - especially when you need to do something very basic like move cuts about (not sure if an IT analagy would be appropriate, but normally when doing repetitive IT jobs, it's far easier/zippier to do things from a command line vs a windows driven approach).

Having trialled a lot of programs, I was blown away at how cambam sped up my workflow... I agree it's probably a bit of a learning curve (& you have to get into the mindset of the program!), but worth a couple of nights put by getting to know it.

[martin54]

Well I'm no spring chicken! But having gone through a similar analysis phase about 18 months ago, i found Vectric to be very slick & pleasing on the eye....but then when I wised up I realised that all the eye candy 'window/GUI centric' approach was just a pain in the arse - especially when you need to do something very basic like move cuts about (not sure if an IT analagy would be appropriate, but normally when doing repetitive IT jobs, it's far easier/zippier to do things from a command line vs a windows driven approach).

Having trialled a lot of programs, I was blown away at how cambam sped up my workflow... I agree it's probably a bit of a learning curve (& you have to get into the mindset of the program!), but worth a couple of nights put by getting to know it.

Maybe it is an age thing, don't forget not everyone has the same sort of It background you do. I would imagine in your job software plays a big part so learning new software dealing with code is bread & butter stuff for you. I had a look at cambam & I am sure it is a very good program, if it wasn't there wouldn't be so many people using it but at the moment I don't have the time to sit down & spend the time learning it. That's not to say that I won't use it in the future but by then I will have a much better idea what I am doing when generating toolpaths so may find it easier to learn at that point.
Cut2d is a bit flashy I agree but if you are completely new to all this it is easy to use which is what I really need just now at an early stage.