. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 17-11-2012 #10
    dudz's Avatar
    Lives in Dunedin, New Zealand.
    dudz
    Last Activity: 09-02-2025 Has a total post count of 295. Received thanks 2 times, giving thanks to others 79 times.
    Quote Originally Posted by HankMcSpank View Post
    ...immediately after doing this, you'll get a new table entry created on the bottom left hand side of your screen called drill (under machining)...you set all the parameters for that partiular drill routine in there (depth, drill size, plunge rate etc).
    I get nothing here. I do as you instruct, press the "Drill" button, then on the left column the Drill shows under machining. I cannot get anything that lets me alter depth,drill size,plunge rate. I double click on the "drill" on the left hand column, but nothing happens.
    Last edited by dudz; 17-11-2012 at 03:19 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: Re my question
    By oldwoodworker in forum New Member Introductions
    Replies: 32
    Last Post: 20-09-2013, 09:07 PM
  2. PSU question
    By Dwayne Dibbley in forum General Electronics
    Replies: 16
    Last Post: 13-02-2013, 10:15 PM
  3. Newbie. Questions about design software and machine control software
    By MTech in forum Computer Software
    Replies: 2
    Last Post: 11-12-2012, 12:58 PM
  4. To usb,or not to usb,that is the question.
    By Jumbo in forum General Discussion
    Replies: 11
    Last Post: 17-10-2011, 09:21 PM
  5. A question
    By bodgeitandscarper in forum Gantry/Router Machines & Building
    Replies: 7
    Last Post: 02-12-2009, 08:30 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules