Thread: Software question
-
17-11-2012 #11
-
17-11-2012 #12
Yes, I found it now....thanks. Spent hours today on it. Got some good results. I produced a design with 5 milling profiles. I produced the tool-paths, and then made the g-code. Opened Mach3 and imported. Only once out of around 20 times did all the profiles show in mach. I have no idea why or how I managed to get all of it to work in Mach once and not the other times. I'm sure I did not change anything. I have only "Profile 1" and "Profile 4" that now actually shows up in mach.
Any ideas please ?
-
18-11-2012 #13
Not sure (I don't use Mach3 as I prefer CNC-USB)....you could try going to 'system' (top of the screen), then clicking on post processors & then selecting Mach3? Else you could try asking the forum....
http://www.cambam.co.uk/forum/ ...I'm sure someone will know there (it's worth persevering with the teething troubles...IMHO it really is a great piece of software - & I've trialed a lot of different CAD/CAM apps!)Last edited by HankMcSpank; 18-11-2012 at 12:45 AM.
-
04-02-2013 #14
Dolplhin PartMaster CAM and CAD modules both have a 'Pattern' feature which provides for
the definition of a Rectangular or Bolt Hole pattern of Holes which can then be subsequently
submitted to the Drill operation. Details can be found at Dolphin Hobby Cad Cam Software, PartMaster, CNC
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: Re my question
By oldwoodworker in forum New Member IntroductionsReplies: 32Last Post: 20-09-2013, 09:07 PM -
PSU question
By Dwayne Dibbley in forum General ElectronicsReplies: 16Last Post: 13-02-2013, 10:15 PM -
Newbie. Questions about design software and machine control software
By MTech in forum Computer SoftwareReplies: 2Last Post: 11-12-2012, 12:58 PM -
To usb,or not to usb,that is the question.
By Jumbo in forum General DiscussionReplies: 11Last Post: 17-10-2011, 09:21 PM -
A question
By bodgeitandscarper in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 02-12-2009, 08:30 AM
Bookmarks