. .

Thread: Hi Everyone.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 19-11-2012 #1
    Jonathan's Avatar
    Lives in Leicester (Home) or Nottingham University (2nd Home), United Kingdom.
    Jonathan
    Last Activity: 05-04-2020 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 3,571. Received thanks 325 times, giving thanks to others 8 times. Referred 1 members to the community.
    Quote Originally Posted by arborealad View Post
    I only intend to cut styrene sheet prototype parts and then final parts in 2mm and 3mm carbon fibre sheet with it.
    Things like dash mounting plates, the odd bracket here and there etc.
    To be fair, much as I would like to point out how bad the CNC3020 is, at least until the electronics fail, it will be able to cut foam and carbon fibre quite easily so if that's all you need it could be considered logical choice.
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.
    Reply With Quote Reply With Quote
  2. 20-11-2012 #2
    GEOFFREY's Avatar
    Lives in bourne, United Kingdom.
    GEOFFREY
    Last Activity: 14-01-2024 Has been a member for 9-10 years. Has a total post count of 769. Received thanks 48 times, giving thanks to others 55 times.
    Hi Adam, I too am new member and am live close to Sleaford. Good luck with your new machine, and if I can be of any help just ask. Ihave to admit that I dont know anything about mac as i have always had machines with a dedicated controller.Hope our paths may cross soon. Regards,Geoff.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules