Threaded View
-
18-11-2012 #1
Hi all,
im new to Diy CNC'ing in general & finally bit the bullet & started ordering parts for my own 3-axis router. i started ordering the parts looking at the Target'ed work envelope & pretty soon i realized that it would be better if i start building the machine around the Spindle. therein lies my problem as i would like to mill metal & i would appreciate some help from you guys collective experiences.
at the moment im researching brushless motor choices against:
- power requirements(W)
- Suitable Kv(RPM/V)
- power source (coupling matched pairs in series &/or parrellel to reach the target motor operating range- not necessarily motor max)
- shaft diameter & coupling method(ie:- replacing the motor shaft with the collet shank / end-to-end-lovejoy type / threading the motor shaft & screwing it into the collet shank) ect.
as a compromise for spindle stability vs bearing RPM Max vs target RPM for metal, i figure a 12mm shank dia was a good starting point so i went ahead & bought a "C12 ER16 100mm collet chuck shank" along with 2 matching single row a/c bearings & a radial bearing(good for 20k on oil).
im hoping i'm on the right track so far,
im really hoping you guys can point me in the right direction on the points listed, and any others i need to be aware of. how would you go about tackling this build?
hopefully this will turn out into a dedicated build log.
Thanks,
Kevin
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
eBay: 300W 12V-48V DC High speed air cooled spindle motor for engraving milling
By Swarfing in forum Items On eBay UKReplies: 0Last Post: 16-06-2013, 01:33 PM -
Can anyone recommend a spindle for milling PCB and cast acrylic?
By HankMcSpank in forum Spindles & Drive MotorsReplies: 10Last Post: 11-10-2011, 08:54 PM -
WANTED: Wanted: Small Metal Work Milling Machine
By 07trb in forum Items WantedReplies: 0Last Post: 04-03-2011, 06:58 PM -
A little help on designing in Solidworks
By D-man in forum Computer SoftwareReplies: 3Last Post: 04-11-2010, 10:49 PM -
Looking for some help designing my gantry please
By psiron in forum Gantry/Router Machines & BuildingReplies: 13Last Post: 05-07-2010, 09:52 PM
Bookmarks