1.5mm Mill End Cutter Can Anyone Recommend a Supplier

[Jonathan]

One or two flute cutters are readily available, so if you don't mind reducing the feedrate to half or a third of what you would use with 3fl, you could use less flutes:

5pcs 1.5mm Single Flute Carbide Spiral End Mills Router Bit 6mm CEL | eBay

[Ridgeback]

One or two flute cutters are readily available, so if you don't mind reducing the feedrate to half or a third of what you would use with 3fl, you could use less flutes:

5pcs 1.5mm Single Flute Carbide Spiral End Mills Router Bit 6mm CEL | eBay

Unfortunately this is a propitiatory machine i.e. chuck fitting , cutter speed, so I can't change anything.
The only thing I can do is look for an alternative supplier, someone has to make these cutters, they can't be that unique.
If they were more sensibly priced I wouldn't be spending my time trying to find the "holy grail"
If anyone is interested in key cutting to code this video link is the same as my machine
Bianchi Laser 994 Edge - Cut by Decode & Code - YouTube


Thanks for your assistance