1.5mm Mill End Cutter Can Anyone Recommend a Supplier

[Ali Kat]

Have you tried J&L MSC? They stock a load of different milling cutters. This link is just an example.
https://www.mscdirect.co.uk/CGI/INPD...TEM=MCL-50509C

Good luck

[Wombilly]

MSC J&L cutters are cheap cutters with a life of around 2 months, costing around the £15 to £25 mark.

ITC are superior cutters with prices around £30 upwards, but they will last you 2 years plus.

CNCRouterShop also supply cutters and have a fantastic guide to assist you. of whhich you can download for future use.