Thread: VHD Mounting problem
Threaded View
-
24-11-2012 #5
Last Activity: 26-09-2016
The cable I have connected is about 15ft ...but due to the way it has to route from the machine to the VFD the VFD is about 8ft away from the control box for the steppers ....very small filter on the incoming. Do you think the problem is the cable?
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
RFQ: 10mm ali mounting plates
By charlieuk in forum Projects, Jobs & RequestsReplies: 0Last Post: 07-03-2014, 11:26 AM -
Mounting motor under table?
By Rogue in forum Linear & Rotary MotionReplies: 51Last Post: 16-04-2012, 04:02 PM -
RFQ: Mounting Plate
By ferus in forum Projects, Jobs & RequestsReplies: 9Last Post: 26-10-2011, 02:56 AM -
Extruded alu and mounting rails on em
By CNCBlug in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 04-03-2010, 06:50 PM -
2 ways of mounting motor
By Steve-m in forum Gantry/Router Machines & BuildingReplies: 8Last Post: 28-02-2009, 01:12 AM
Bookmarks