. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 25-11-2012 #9
    PWD's Avatar
    Lives in Chester, United Kingdom.
    PWD
    Last Activity: 26-09-2016 Has been a member for 9-10 years. Has a total post count of 20. Received thanks 1 times, giving thanks to others 1 times.
    many thanks for that guys..especially Clanzer

    To belt and brace it I will replace the cable between the VFD and the spindle and fit some more EMI's whilst carefully planing the route ...question though...is this the correct cable required and what is the 4 pin connector plug called that connects to the spindle (looks like xlr )...will try and source a new one for a nice new solder fix.(if anyone knows from were that would help) also is there any limit to emi's fitted...have a few here so shall I stick em on adjacent equipment wires
    BELDEN 19364 SHIELDED MAINS POWER CABLE PER METRE | eBay

    If this is the correct cable I understand the drain wire should be earthed at the VFM end only..yes?

    Cheers again..very grateful
    Last edited by PWD; 25-11-2012 at 11:02 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. RFQ: 10mm ali mounting plates
    By charlieuk in forum Projects, Jobs & Requests
    Replies: 0
    Last Post: 07-03-2014, 11:26 AM
  2. Mounting motor under table?
    By Rogue in forum Linear & Rotary Motion
    Replies: 51
    Last Post: 16-04-2012, 04:02 PM
  3. RFQ: Mounting Plate
    By ferus in forum Projects, Jobs & Requests
    Replies: 9
    Last Post: 26-10-2011, 02:56 AM
  4. Extruded alu and mounting rails on em
    By CNCBlug in forum Gantry/Router Machines & Building
    Replies: 5
    Last Post: 04-03-2010, 06:50 PM
  5. 2 ways of mounting motor
    By Steve-m in forum Gantry/Router Machines & Building
    Replies: 8
    Last Post: 28-02-2009, 01:12 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules