Thread: 3 axis cnc/router bed
Threaded View
-
02-12-2012 #1
My table on my "3 axis cnc/router" is a vacuum table, but the x axis is a moving axis, so I would assume it is difficult to use a pump with lines across the rails. Where can I get a "bolt on" replacement bed the same size with pre-drilled clamp holes ? The bed measures 450x300mm. / Or would it be a better idea to buy a vacuum pump ? but these seem very expensive. I plan to mill alu, cut plastic and carbon fiber.
Last edited by dudz; 02-12-2012 at 02:50 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: 3 Axis Router
By GTJim in forum DIY Router Build LogsReplies: 8Last Post: 22-06-2020, 08:49 AM -
BUILD LOG: 3 Axis CNC router
By JoeHarris in forum DIY Router Build LogsReplies: 658Last Post: 21-06-2020, 10:41 PM -
3-Axis CNC Router - For Helices.
By Dalmango in forum Gantry/Router Machines & BuildingReplies: 4Last Post: 08-02-2014, 07:27 PM -
BUILD LOG: Wobbly: my first 3-axis router
By Sodster68 in forum DIY Router Build LogsReplies: 8Last Post: 20-01-2013, 10:28 AM -
Need 6' x 4' bed, 4 axis router design.. Help..!
By fasteddy in forum Gantry/Router Machines & BuildingReplies: 29Last Post: 17-09-2010, 12:56 PM
Bookmarks