7' X 4' Combi

[JAZZCNC]

Rick simple thing but worth doing is putting the register on the first pic at the top not bottom it makes setup easier has the register sits on the bearings machined edge while bolting up.

[Ricardoco]

Rick simple thing but worth doing is putting the register on the first pic at the top not bottom it makes setup easier has the register sits on the bearings machined edge while bolting up.

Ahhhh cheers Jazz, I had to read that twice LOL yeh makes sence now, Thats wont take two ticks as the bearings are 46 wide and the pockets were 48 so ive just moved 1 wall in 1 mm so ill move that back out and the other one in, that will still give me 1 mm free play in the pocket.

Rick

[Jonathan]

Rotating nut assemblies for your X axis ballscrews are ready:

[Ricardoco]

Rotating nut assemblies for your X axis ballscrews are ready:

Blimey Now the pressure is on, i was working on the Z whilst i was waiting for these, Looks like i better get my arse in gear!! Thankyou Jonathan, I know you worked over Christmas to get these out for me, I look forward to seeing the posty when he delivers these..

Rick