Thread: 7' X 4' Combi
Threaded View
-
02-12-2012 #1
This will be a Router/Mill with Plasma,
Ok i should have started this thread sometime ago but i wanted to collect as many bits as i could to get a good start. So I used sketchup to give me the initial concept...
The first thing that was pointed out to me was that the Gantry may be a little too high and so thaat has been altered now.
the machine will eventually have an ATC and has 2 stations at the right side of the gantry for the most commonly used tools, and the rest on the front of the bed, there is also a Secondary 7" Touch screen with a custom mach layput to suit its size.
Here is also a picture of some of the goodies that will go to building it.
There was a few more additions to this but they wouldnt fit on the table...
Today i started work on the electrics box...
I will start the internals Next Weekend...
RickAlways bear in mind that your own resolution to succeed is more important than any other - Abe Lincoln
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks