7' X 4' Combi

[Ricardoco]

One other thing I don't see any reference to a ballscrew or bearing mountings for one.?

The slot up the centre looks rather narrow for Ballnut and it's mount has well.?

I have two AC Bearings for the top mount and the Top plate has pockets accordingly 32x10 ID12 and a floating beatring for the bottom. (to suit a 1605 ballscrew) each half of the channel is 40x20mm so that should be enough... I think..



This is the ballnut i will be using although im open to suggestions, If you think a better one could be used.

Rick