7' X 4' Combi

[Ricardoco]

Rick If those pieces that look like 1" box are for the bed support then it's not going to strong enough with big chance you'll get bed dipping.
The forces when plunging and ramping etc can be high.! Even my 50mm box with 16mm Ali bed can flex when plunging into hard materials. Honestly don't under estimate the forces.!!

Hi Jazz, that 1" box is going to be supporting the water bed for the plasma only. The milling bed is going to be much tougher and stiffer. There is a 50x50x3mm box section frame topped by 40x40 profile for the Router/Mill bed that is still in production, you should see that appear about mid march.

Rick