7' X 4' Combi

[Ricardoco]

Bonus points for filming the nuts spinning in the next video....

Ok not a great movie i know and the audio was rubbish so i had to substitute it

Mach3 should be used in milimeters, not centimeters, so going from X0 to X100 (or just moving 100 from the current position) should move 0.1m, not 1m.

Ok let me see, its showing 100 on the DRO when it is moving 1000 so that is a 10th so steps per in motor tuning should read 200 x 10 = 2000 and then X100 should move the gantry 100mm yes?

Rick