What computers do I need

[Web Goblin]

So seperate computer in the shed for the cnc machine. Strip it of all useless software that it doesnt need. All you really need is a basic windows install, ie for a bit of surfing while in the shed, and your cnc control software and possibly another copy of your cad/cam software for some editing at the machine.
Any decent memory stick should do the job. I like Kingston usb sticks, a bit more expensive than some but they work well.
The cnc files are not usually very large so a standard 1GB stick will easily be large enough. Cabled network would be the way to go though.

[paulkane1]

Could you clarify something for me please, I am picking up from various Forums,that its better just to have Mach3 on a computer by itself,with no other Software? but I take it ,you do it, and everything is running ok?

Paul

[Musht]

Thing with Mach3 is it uses very deep level control of the operating system to generate timing for controlling the machine.

If anything tugs the operating systems sleeve whilst it is running Mach3 , it could miss a ferw steps and scrap the work your cutting.

Just need a very basic old computer with a paralell port to run Mach3.