Quote Originally Posted by martin54 View Post
Best of luck with it Greg, remember to take your test metre with you this time lol, if it fires up all you need to do then is get your head round the software which shouldn't be to difficult as your only dealing with one program. As I said before gerber used their own version of gcode but as far as I am aware using gerber advantage you will be able to design something to machine, create the code & then cut it all from the same program.
I say as far as I am aware because that is what I was told, I've never actually used the software myself because the machine wasn't working when I got it & as it's now been upgraded it won't be able to run it as it did before. I would also have had to sort out an older computer because the guy said that version 6 which is what I got with it wouldn't run on anything latter than windows 98.
Hi, I am a new member and could use some help please.
I have a Gerber system 48 plus router which was running off of my Gateway 2000 466 computer for over 25years.
Well, the computer crashed and because of the Dongle and it's card
I was old to have this dinosaur rebuilt.
So I did. I have the Graphic Advantage CD installed using windows 95 as my operating system.
I am able to use the composer program, however, when I try to use the Artpath program I get an error message
(Router not connected). Can you help me?