Free to good home: TC shanks from broken cutters

[HankMcSpank]

I have about 20 TC shanks from broken cutters, all 1/8" (maybe some 3mm) about 25 - 30mm long. If anyone can grind them into engraving cutters they are welcome to them.
The supply of these is slowing as I am getting better at not breaking them !!!!

Rob Townshend

I'm equally adept at breaking these...as Jack Nicholson once said "Go sell broken cutters somewhere else...we're all stocked up here!" (ok so I changed it a little).

FWIW I use broken cutters as 3.175mm dowel pins ...the tops are normally chamfered which mean they fit into holes well :-) ...ideal for say, double sided pcbs when you flip the board over for the 2nd cutting run.