Guys

Just a word of warning, I used to be in the vehicle repair industry and 2K paint is carcinogenic, this was used in a fully filtered low bake spray booth with air fed full face spray mask.
Here is the HSE recommendations from the product linked above.

Respiratory protection: Air-fed respiratory equipment should be worn when this product is sprayed. Other people nearby should be similarly protected if exposure cannot be controlled to below the
occupational exposure limit and engineering controls and methods cannot reasonable be improved.
Dry sanding, welding and/or flame cutting of the dry paint film will give rise to dust and/or hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be
avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. Further information on respiratory protective equipment is available in HSE
publication "Respiratory Protective Equipment" Third Edition ISBN 011 886382 7.
Hand protection: When skin exposure may occur, advice should be sought from glove suppliers on appropriate types. Barrier creams may help to protect exposed areas of skin but are not substitutes
for full physical protection, and should not be applied once exposure has occurred.
Eye protection: Eye protection designed to protect against liquid splashes should be worn.
Skin protection: Cotton or cotton/synthetic overalls or Coveralls are normally suitable. Grossly contaminated clothing should be removed and the skin washed with soap and water or a proprietary skin
cleaner.