How about a mycncuk cnc router project?

[martin54]

I still don't think it's something that's needed & can't see why some people seem so obsessed with it. Seen things like this destroy good forums before because of the bickering it causes & you don't want to go losing any of your most experienced members. Don't think it will do a lot to grow the forum either, people will just download the plans & get on with building themselves a machine, no need to ask any questions or think about the best design because you already have it.

[Swarfing]

Lee

Maybe you could set up a section where people could advertise kits of parts? I'm sure some forum members would be willing to make these? this would help these not so fortunate to have the kit t do the necessary. This way the site would be catering for all types of builders????

[Lee Roberts]

I still don't think it's something that's needed & can't see why some people seem so obsessed with it. Seen things like this destroy good forums before because of the bickering it causes & you don't want to go losing any of your most experienced members. Don't think it will do a lot to grow the forum either, people will just download the plans & get on with building themselves a machine, no need to ask any questions or think about the best design because you already have it.

I acknowledge what your saying Martin but dont think it would lead to the forum losing its momentum, i think if anything it could raise the standards of what's being discussed.

lee what you say is true. I would have to say that if anybody looking at the plans has real issue, then they obviously know better and should just do their own thing anyway? In general people want to make sure they are doing things right so the forum will always be here to help. Like the MM forum maybe a numbeing syem for all that are complete would work well :-)..........Lee get the official stickers out with a MYCNCUK logo at hand??????

I actually think that there is more to this than is first realised, there is allot of things I can do/plan to do that overall is really going push this to the next level. Let me explain, I/we obviously see time and time again people asking the same questions, I take my hat off to people like Jazz and Jonathan for showing such stamina when it comes to replying to more or less same questions all the time. I also know how boring and frustrating it is for them to keep doing this.

Some of you know what I’m about to say already...The plan is to have Articles, Reviews, Tutorials and so on, as these areas of the site start to get populated allot of what will be in each section will be perfect for people coming in as newbie’s. We are going to have a series called “The Basics”, these articles will give people the information they need and a springboard to get them going in the right direction. There is a lot more to all that and other ideas and so on but what it leads me to say is that:

I think allot of “how we move this cnc thing and this forum forward” is relying on me to deliver on what I keep talking about, SOOOO many things will become better for everyone once things really start to take shape with what I’ve got in mind. I’m stressed with it because I know how desperately some of these things are needed to just “make things better/easier” for everyone, the problem I’ve got is its all down to me, believe me I am trying. I’m just really busy and in a difficult position in my personal life to spend the kind of time I need to work on the many projects and ideas I’ve got, but it’s ok because it’s a marathon for me not a sprint, allot of my “vision” for things to come is still young, this forum is only what 4-5 years old now and allot of what is in my ideas has actually come from discussions like these and because of that the my vision has evolved and this introduces new things to think about and decide on, which have a knock on effect to everything else.

Yep, i wouldnt have any problem endorsing? or branding somthing if it would be what you guys would like. (i think that's what you mean't?)

Lee Maybe you could set up a section where people could advertise kits of parts? I'm sure some forum members would be willing to make these? this would help these not so fortunate to have the kit t do the necessary. This way the site would be catering for all types of builders????

Yea no problem, although we already have the Market Place section of forums for doing that kind of thing. Hehe, maybe now is a good time to talk about freelancemachinist.com....Anyway I’m starting to waffle, it’s getting late and I’m desperate to get back to coding up what will be the “doc” for the chat app I’m working on.

.Me

[GEOFFREY]

Martin, as you know I am fairly new to this site and only came up with this suggestion because I thought it would be helpful to new and inexperienced cnc wannabies. To build a good little machine and then be able to make some lovely things with it must be very satisfying (I know how I felt when after dozens of hours trying to sort my machine conversion out I was at last able to make something).

I was, and still am thrilled to think that I am now able to have an idea, design, draw then make it. Fantastic - and that from a now 69 year old. I am only sorry that I did not discover cnc years earlier.

Hopefully "bickering" will not enter the equation. I do not see why healthy discussion should harm this site or lead experienced members leaving.

Of course there will some differences of opinion about things, but at the end of the day if we can end up producing something that will encourage new blood then surely that would be a good thing. If this gets off the ground, not everybody will have their own way, somebody will have to consider the various comments and then make their decision - its no good trying to design a machine by committee - and we can then perhaps have the best starter machine available. Without doubt there may be some really good ideas that do not get incorporated, but those ideas will remain on this forum, and may well be used by members in some future project of their own.

Yes, you are right, some people may just download plans and go their own way, but I think that once (site membership might be a requirement to get the plans)
they have joined the site and realized what help is available they too could be stricken by the cnc bug. G.