Threaded View
-
12-07-2014 #11
Last Activity: 24-03-2022
Not much progress but changed the "L" shape on the gantry as JAZZ suggested. I'm now using 2 pieces of 80x120 and 2 pieces of 40x40 (mainly for filling the gap). This used to be 60x30 but thought I better bulk it up. Also the height (total height 350mm) and width (now 175mm) of the gantry side plates has increased a little to accommodate. Still undecided with what to do at the back of the gantry... I need to leave enough room to mount the motor on the inside (using pulleys).
Last edited by biketrialsdave; 12-07-2014 at 10:29 AM.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
aluminium profile for cutting bed of router
By steeplejack in forum Marketplace DiscussionReplies: 3Last Post: 19-10-2013, 10:52 PM -
BUILD LOG: New CNC router 8x4 For Cutting Multiple Materials
By ciscoeuk in forum DIY Router Build LogsReplies: 19Last Post: 03-02-2013, 02:01 AM -
Multiple CNC Opportunities both Nationally and Internationally
By cnc jobs in forum Opportunities Available & SoughtReplies: 0Last Post: 21-09-2012, 01:01 AM -
WANTED: CNC Mill/Router for Cutting Aluminium
By kylelnsn in forum Items WantedReplies: 5Last Post: 09-08-2012, 09:54 PM -
Test cutting materials
By Kai in forum General DiscussionReplies: 6Last Post: 05-12-2010, 10:27 AM
Bookmarks