CNC Router V1.0 (For Cutting Multiple Materials)

[biketrialsdave]

Hmmm I think its probably best to disassemble the gantry from the base and re assemble everything checking alignment more strictly as I go...at least I now know it all goes together!

[biketrialsdave]

Right, time to order a DTI (don't shoot me, probably where I went wrong in the first place!). Should I go for lever or plunger type? Lever appears more expensive but if it's going to be more useful then I don't mind. I'm looking here: http://www.lawson-his.co.uk/precisio...ial-indicators

While I'm at it, is there any other piece of measurement equipment (straight edge etc.) that is worth buying for setting things up?

Cheers!!

[routercnc]

I think you could use either to align the second rail. Be aware you also need the connecting rods to hold the indicator in place and ideally a mag base. You can buy Mitutoyo (v good quality) but for DIY I'd look on eBay. You can get a DTI, adjustable rods and mag base as a set for under £20.

Mine were both mid price units from ArcEuro