Hello There
It took me 3month to build cnc router
I am wondering where did missed
My specs are as follows
Working area:4*8 feet
Actuation:TBI ball screws 3210 2510 and 1610 for xyz axis respectively And hiwin linear guide and bearing.
Stepper motor: 1200oz-in (4.5 amp & 70v) and drive are of 6 amps 80v ac )
Power supply: i have provided 80v and 6amp to each stepper /driver.
I am running my cnc router 6mtr/m
Successfully when drives is set on 6amp
My stepper motor heats like hell
When i reduce current my max speed also get reduced.
Recently my friend showed broucher of some company.
Company is claiming that max speed will be 25mtr/m that seriously gives me an anxiety. This is hard to believe where did i missed. Why i cant achieve this speed.
And one more thing is that they are using rack and pinion.
How this is possible.
My steppers stalls whenever i try to go above 6mtr/m



Sent from my Redmi Note 3 using Tapatalk