Thread: T and L profile Joining plates
-
02-01-2013 #1Swedish Storbro Luna - 3 axis CNC mIll - 250 - 2500rpm / 1.1 tonne
3 axis CNC/router / Alu profile frame....25mm Alu Cutting bed X=500mm Y=300mm Z=110mm.....Supported 25mm X rails ....Supported 20mm Y rails....Supported 20mm Z rails.....2.2kw Chinese WC spindle..... CSLAB CSMIO/IP-M 4-axis Ethernet Motion Controller....M542 Drivers..SY60STH86-3008BF Motors...running....Mach3 / Cambam / Emachineshop.
-
02-01-2013 #2
No idea where you can get them, but I made a fair few for luke11cnc here on this forum. If you're not to fussed about how it looks you could get some 4mm aluminum sheet and make some yourself, since they don't need to be particularly accurate.
I've unfortunately not got time to make you some, unless you can wait about a month!
-
02-01-2013 #3
Ok.ta.... I will probably make some later then. It just would have been easier to buy some "off the shelf" if they were about.
Swedish Storbro Luna - 3 axis CNC mIll - 250 - 2500rpm / 1.1 tonne
3 axis CNC/router / Alu profile frame....25mm Alu Cutting bed X=500mm Y=300mm Z=110mm.....Supported 25mm X rails ....Supported 20mm Y rails....Supported 20mm Z rails.....2.2kw Chinese WC spindle..... CSLAB CSMIO/IP-M 4-axis Ethernet Motion Controller....M542 Drivers..SY60STH86-3008BF Motors...running....Mach3 / Cambam / Emachineshop.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
RFQ: Z+Y plates & motor bracket
By Gytis in forum Projects, Jobs & RequestsReplies: 6Last Post: 09-08-2013, 12:45 AM -
RFQ: RQF: Router Gantry plates
By lateAtNight in forum Projects, Jobs & RequestsReplies: 1Last Post: 27-12-2012, 04:56 AM -
RFQ: Small Alu plates needed
By m_c in forum Projects, Jobs & RequestsReplies: 6Last Post: 06-06-2012, 01:33 PM -
NEW MEMBER: Finally got round to joining the best CNC group on the net!!!
By g4ghp in forum New Member IntroductionsReplies: 13Last Post: 19-03-2012, 07:31 PM -
NEW MEMBER: Hello Im interested in joining you all
By Guisborough in forum New Member IntroductionsReplies: 3Last Post: 18-08-2010, 11:01 PM
Bookmarks