Thread: F-Engrave problems
Hybrid View
-
25-06-2013 #1
I hope that soon I can get back to looking at this problem. I have had to put so much on hold recently due to health problems (arthritis and torn ligaments).
Rob
-
25-06-2013 #2
I can manage to install and use on a total of 4 other computers but the workshop one is a clean install of either XP sp2 or Xp sp3 2 different computers? have reinstalled OS 3 times now...Older installed computers seem to work ok.
Result is the same on both new computers " application configuration is incorrect"
-
25-06-2013 #3
Just tried this on a Virtual XP machine running on Win7, it runs OK.
Peter
-
25-06-2013 #4
I assume you have been using the precompiled windows version (i.e. F-Engrave-1.13_win.zip). You may want to try installing Python (Version 2.7.5 from Python Programming Language – Official Website) on your computer and just run the f-engrave-113.py file.
I will see if I can replicate your XP problem when I have a chance.
Scorch
-
26-06-2013 #5
@IanParkin
I did some research but I don't have a surefire solution.
I did make a small change and uploaded a new zip file for you to try. Here is a link to the modified zip file F-Engrave-1.13_winIAN.zip
Let me know if the new file works for you.
Scorch
-
28-06-2013 #6
I'm sorry still does not work
It seems to be only on a fresh install of windows XP
as I said all the older machines some running xp some not it works fine
Its just annoying not to be able to have it on my workshop one
Ian
-
29-06-2013 #7
Rob,
I think we have a solution for the "application configuration is incorrect"" error. Ian reported that it worked for him in a private message to me. (Thank you to Ian for doing the testing.)
I use Py2exe to make windows the executable file and the developers of Py2exe use Microsoft Visual C. So installing Download Microsoft Visual C++ 2008 Redistributable Package (x86) from Official Microsoft Download Center will hopefully fix your start up issues. The versions of the Visual C matter so even if you have installed one before this version might fix the problem.
Good Luck.
Scorch
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
tree problems!
By kingcreaky in forum Woodwork DiscussionReplies: 8Last Post: 02-06-2014, 12:35 PM -
Fix engrave vertical gap or Upgrading laser cutter control card Leetro MPC6515 ?
By Paul Shroom in forum Machine DiscussionReplies: 3Last Post: 18-05-2014, 03:40 AM -
WANTED: Engraving Machine to engrave around 0.3mm depth, DXF files on aluminium, anyone?
By stuboy in forum Items WantedReplies: 0Last Post: 05-12-2013, 07:28 PM -
problems since update
By motoxy in forum General DiscussionReplies: 6Last Post: 02-11-2012, 06:14 PM -
NEW MEMBER: MDF Problems
By MrWiz73 in forum New Member IntroductionsReplies: 4Last Post: 31-12-2011, 12:39 AM
Bookmarks