F-Engrave problems

[Scorch]

hi
...When I want to save the G-Code, this following error up in the black window:
"Unicode encode error: ASCII codec cant encode character u '/ xe9 in position 56: ordinal not in range (128)"

In text mode F-Engrave does not support characters with a value greater than 128. (These extended characters greater than 128 are my list of things to add support for someday.) The error Szasza880210 is reporting is occurring in "Image Mode". I will look into fixing the error that is occurring in "Image Mode".

Until I get a new version with a fix for this error you may be able to work around this problem by switching to "Text Mode" and deleting all of the text in the "Input Text" box, then return to "Image Mode" and save the g-code.

EDIT: I looked into this a little more... F-Engrave should support characters up to 255 in the latest version. Make sure you are using the latest version (V1.02) from:
http://home.comcast.net/~sskroch/Fengrave/fengrave.html

Feedback on whether the fix works or not will help me with correcting the program.
Scorch