Patrik, new member

[Sodster68]

Hi,
thanks! Eeh, I kind of already bought the linear components... Well, it is a prototype that I learn on so... That will "garantee" a mark 2. Need to come up with a catchy name now.
Btw, what is it about Yorkshire lads?

[kingcreaky]

That will "garantee" a mark 2.

like your thinking :D

[blackburn mark]

I kind of already bought the linear components

owch! sorry man... don't flap, if your tactical with your speeds you should be able to tiptoe around any serious resonance problems

if you are you looking to cut aluminium you may need the patience of a saint
if your cutting acetal/delrin nylon life is likely to be a shitload easier

what is it about Yorkshire lads?

there's only one good thing comes out of Yorkshire.... the road west to sunny Lancashire :)

[Sodster68]

owch! sorry man... don't flap, if your tactical with your speeds you should be able to tiptoe around any serious resonance problems
if you are you looking to cut aluminium you may need the patience of a saint
if your cutting acetal/delrin nylon life is likely to be a shitload easier

No problemas! And thanks for the heads up on resonance! I had forgot about that and will keep in in mind for when testing begins.

there's only one good thing comes out of Yorkshire.... the road west to sunny Lancashire :)

I see, well we have similar conditions in sweden; some shires are best passed through! But, to be serious, I have been around Britain a bit and enjoyed pretty much everything!

Recieved my steppers yesterday! NEMA 23's 3Nm/425oz-in. Detailed design continues, started placing the limits switches.

Regards
Patrik

[blackburn mark]

I see, well we have similar conditions in sweden; some shires are best passed through! But, to be serious, I have been around Britain a bit and enjoyed pretty much everything!

me to, if im honest iv spent half my life paragliding in the Yorkshire dales :)

if you get a chance some pictures of your build would be nice