Thread: Very simple small part
-
10-01-2013 #1
Hi guys,
Need two of these. Nothing fancy just a small rectangle milled down to 13.5mm thickness and then a couple of holes.
Would do this myself on the mitre saw and drill press but the tricky part is getting the 13.5mm thickness. Figure its easier just to pay someone else to do it!
Have the dxf.
-
10-01-2013 #2
You have missed the hole centres out
John S -
-
10-01-2013 #3
Opps. That's what you get posting first thing in the morning whilst still half asleep.
Try again...
-
10-01-2013 #4
Can do you a couple but won't be until Monday as I'm away until then on yet another Ebay round run [ or is that run around ? ]
This any good ?
What material, alloy or steel ?John S -
-
11-01-2013 #5
That's more than fine with me, thanks John. Aluminium is fine for this or whatever you have lying around. Doesn't have to be perfect either, its only a spacer so its just the depth of 13.5mm that has to be accurate.
I'm up in Notts most weekends so could come collect. Long Eaton isn't far from Bulwell.
-
11-01-2013 #6
That's more than fine with me, thanks John. Aluminium is fine for this or whatever you have lying around. Doesn't have to be perfect either, its only a spacer so its just the depth of 13.5mm that has to be accurate.
I'm up in Notts most weekends so could come collect. Long Eaton isn't far from Bulwell.
Ps. What you bought now or is that sold?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
RFQ: Small sized Parts need making, small batches
By Ptee in forum Projects, Jobs & RequestsReplies: 3Last Post: 17-01-2014, 06:07 PM -
RFQ: Simple job cutting simple shapes out of camera lens cap
By RockandGrohl in forum Projects, Jobs & RequestsReplies: 15Last Post: 20-04-2013, 01:23 AM -
RFQ: Request: 200 units of a small part
By craynerd in forum Projects, Jobs & RequestsReplies: 1Last Post: 13-02-2012, 10:25 AM -
why is nothing in life simple!
By ptjw7uk in forum General DiscussionReplies: 7Last Post: 08-07-2009, 09:21 PM -
Request for two small steel rod-esque lathed part!
By HankMcSpank in forum General DiscussionReplies: 42Last Post: 29-06-2009, 02:32 PM
Bookmarks