. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 18-01-2013 #1
    Jonathan's Avatar
    Lives in Leicester (Home) or Nottingham University (2nd Home), United Kingdom.
    Jonathan
    Last Activity: 05-04-2020 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 3,571. Received thanks 325 times, giving thanks to others 8 times. Referred 1 members to the community.
    Quote Originally Posted by Ricardoco View Post
    So Can I as i have Two 2100mm 2010 ballscrews and nuts in my front room, waiting to go on my machine along with the rotating ballnut mounts made by Jonathan..

    Rick
    Er, I hope not as you said recently they were RM2510 so that's what I made the rotating ballnut mounts for, since at the time 2010 wasn't available. If they are RM2010 I will have to make new shafts to suit.
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.
    Reply With Quote Reply With Quote
  2. 18-01-2013 #2
    Ricardoco's Avatar
    Lives in Tunbridge Wells, KENT, UK, United Kingdom.
    Ricardoco
    Last Activity: 23-01-2017 Has been a member for 9-10 years. Has a total post count of 762. Received thanks 33 times, giving thanks to others 26 times. Made a monetary donation to the upkeep of the community.
    Quote Originally Posted by Jonathan View Post
    Er, I hope not as you said recently they were RM2510 so that's what I made the rotating ballnut mounts for, since at the time 2010 wasn't available. If they are RM2010 I will have to make new shafts to suit.
    Yep you are correct, that was my mistake, however i did enquire about 2010 when i purchased mine and Chai confirmed he did them..



    Rick
    Always bear in mind that your own resolution to succeed is more important than any other - Abe Lincoln
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Milling machine yaw and pitch adjustment
    By Golfer4588 in forum Milling Machines, Builds & Conversions
    Replies: 1
    Last Post: 16-01-2012, 03:02 PM
  2. Fine pitch Bolts
    By Normsthename in forum General Discussion
    Replies: 1
    Last Post: 13-08-2010, 11:13 PM
  3. Stepper shaft size and pulley bore size problem
    By psiron in forum Linear & Rotary Motion
    Replies: 13
    Last Post: 15-06-2010, 04:11 PM
  4. What pitch ballscrew would you recommend?
    By AdCNC in forum Lead Screws, Nuts & Supports
    Replies: 6
    Last Post: 23-02-2010, 02:08 AM
  5. Super X1 conversion - Lead Screw Pitch?
    By bruce_miranda in forum Lead Screws, Nuts & Supports
    Replies: 2
    Last Post: 19-09-2008, 01:29 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules